Haier TV Universal Remote Codes With Programming Instructions
At times, there is a possibility for Haier TV remote to stop working due to diverse reasons, Therefore, you can have a universal remote as the best replacement. But you can’t use the universal remote readily because it requires programming. Accordingly, we have listed the corresponding remote codes required to program a universal remote to your Haier TV.
List of Universal Remote Codes for Haier TV
Here is a list of 3, 4, and 5 digit remote codes that you can use to program a universal remote to your TV.
3 Digit Codes
4 Digit Codes
5 Digit Codes
GE Universal Remote Codes for Haier TV
Note: You can refer to the above-mentioned codes to program a GE universal remote to a Haier TV.
RCA Universal Remote Codes for Haier TV
Philips Remote Codes for Haier TV
One For All Universal Remote Codes for Haier TV
Note: You can make use of these 4-digit remote codes to program a One For All remote to Haier TV.
How to Program Universal Remote to Haier TV [Manual Method]
 Using the physical Power button, turn on your Haier TV.
 Press the TV button on the universal remote.
 Then, press and hold the SETUP button until the LED light begins to flash.
 Enter the respective remote code.
 After entering the code, aim the remote at the TV and press the Power button and keep hold of it.
 If it turns off the TV, you have successfully programmed the remote.
How to Program Universal Remote to Haier TV [Code Search]
 Press the physical Power button to turn on your TV.
 Then, press the SETUP button and enter the code 9-9-1 in sequence when you see the LED light starts blinking.
 Press the Channel Up and Power buttons and hold them simultaneously until the device is turned off.
 If your TV turn off, it indicates that the remote programming is successful.
How to Program Universal Remote to Haier TV Without Code
 Turn on your Haier TV using the physical Power button and press the TV button.
 Release the button if the LED light starts flashing,
 Point the remote to the TV and press the CH+ and CH- buttons continuously until you see on/off signals on the remote.
 Next, press the Up and Down buttons at a time until the TV is turned off.
 Once turned off, press the Power button on the remote to check if it turns on the TV. If it turns on, press the Channel keys to test its functions.
 Finally, press the Device button to save the code.
Start using the universal remote by pressing the function keys of your wish.
Yes, you can use third-party Haier TV remote apps to control your TV from a smartphone. These apps are available in the Play Store and free to download and use.
If you want to program a DirecTV universal remote to Haier TV, you can use the following codes.
12690, 12309, 10706, 11753, 11749, 13204, 11034, 12494, 10768, 12049, 12293, 12434, 10885, 13382, 11756, and 11748.