
3, 4, & 5 Digit Roku TV Remote Codes With Programming Instructions
If you have purchased a new universal remote for your Roku TV, it is mandatory to program the remote to your TV to get started. Luckily, there are three methods for programming the universal remote. However, you must know the Roku TV remote codes. The list of universal remote codes for all brands with detailed programming instructions is given below.
Roku TV Remote Codes for All Universal Remotes
The following are the Roku TV remote codes compatible with all remote manufacturers.
Altice USA
You can also use these remote codes for Optimum, Suddenlink, and Cablevision remotes.
1561 | 1661 | 1931 | 4141 | 2801 |
3311 | 3411 | 0001 | 0821 | 1111 |
AT&T DirecTV
10706 | 11756 |
AT&T U-verse
12434 | 1346 | 1097 |
Bright House Cable
1756 |
Buckeye Broadband
2434 | 12434 |
Cable One (Sparklight)
2434 |
CenturyLink
3183 | 2434 | 2414 |

Charter (Spectrum)
11756 |
Comcast (Xfinity)
12292 | 11756 |
12290 | 11602 |
12434 |
Cox Communications
12434 | 11756 | 1756 |
DISH Network
645 | 1756 |
535 | 556 |
Frontier Communications
688 |

Note: For programming a universal remote to LG TV, you should input the LG TV remote codes.
General Communications
0087 | 0052 | 0022 | 0015 | 0125 |
0003 | 0342 | 0000 | 0054 | 0044 |
0009 | 0004 | 0164 | 0107 | 0031 |
Google Fiber
2856 |
Hawaiian Telcom
2434 |
ONN Roku TV Universal Remote Codes
3851 | 3201 |
RCA/Voxx Universal Remote Codes
53061 | 52371 | 12049 | 12434 |
10818 | 11756 | 387 |
Time Warner (Spectrum)
268 | 1566 | 387 |
TiVo
0091 | 0366 |
Verizon FIOS
180 |
Windstream
3183 | 2434 | 2414 |
XFINITY
11756 |
GE Universal Remote Codes for Roku TV
0054 | 0003 | 0087 | 0125 |
0004 | 0009 | 0015 | 0052 |
0342 | 0022 | 0044 | 0031 |
0107 | 0164 | 0000 | 2891 |
Inteset INT-422
10885 |

Microsoft Xbox One
T1756 |
Philips Universal Remote Codes
6001 | 5931 | 6171 |
2407 | 6251 | 6381 |
Magnavox Universal Remote Codes
0270 | 0269 |
Note: If you don’t want to use the physical remote or it isn’t working, you shall install and use the Roku Remote app.
How to Program Universal Remote to Roku TV
Here are the three methods to program the universal remote to your Roku TV.
- Without Remote Codes
- Manual Method
- Code Search
Note: You must know the Sceptre TV remote codes for programming a universal remote to Sceptre TV.
How to Program Universal Remote to Roku TV Without Codes
1. Initially, turn on your Roku TV by pressing the TV power button.
2. Press and hold the TV button for 3 seconds and tap the OK/SEL button.
3. The LED light begins to flash, indicating that the remote is available for programming.
4. Aim the remote at the Roku TV and simultaneously press the CH+ and CH- buttons.
You will see turn-on/off signals on the remote.
5. Then press the Up and Down buttons until your TV gets turned off.
6. To turn on your Roku TV, press the Power button on the remote.
If the code is found valid, your TV will turn on.
7. Lastly, press the Device button to store the code.
The remote LED light will blink twice if the remote has been programmed.
Program Universal Remote to Roku TV Using Manual Method
1. Switch on your Roku TV using the physical power button.
2. Press the TV button on the universal remote.
3. After that, click the Setup button until the remote indicator light flashes.
This process is called Learning mode and you should enter the code for programming.
4. Refer to the user manual and enter the appropriate code using the remote.
5. Later, aim the remote at the TV and click and hold the Power button.
6. Release the Power button if the TV has turned off.
7. If your TV doesn’t turn off, repeat the same steps by entering an alternate code.
Check the Roku remote codes of all brands using the above table.
Program Universal Remote to Roku TV Using Code Search
If you cannot identify the code, you can follow the automatic code search method. Here’s how to do it.
1. Press the Power button on the Roku TV to turn it on.
2. Next, click the Setup button and hold it for 3 seconds.
3. If the remote indicator light starts blinking, it is ready for code search.
4. Now press the button 9-9-1 using the remote’s number pad.
5. Following that, press and hold the Power and Channel Up buttons simultaneously.
It will automatically search for the remote code and complete the setup by itself.
6. Release these buttons if your Roku TV has turned off.
Frequently Asked Questions
If the Roku remote is not working, install the Roku mobile app on your Android (Play Store) or iOS (App Store) device. You can use this app to control your Roku TV without a remote.
You can use 11756, 12292, 12290, or 12434 as the universal remote code for TCL Roku TV.