Universal Remote Codes for JVC TV & Programming Instructions

If the JVC Smart TV remote is not working, you will need a replacement remote. You may buy a universal remote instead of the original remote to save more money. However, you should know the remote codes for programming the remote for the first time. Apart from the universal remote codes for JVC TV, you will also learn the instructions to program the remote. Alternatively, smartphone users can learn to set up and use the JVC TV remote app.

Universal Remote Codes for JVC TV

The following are the working remote codes to program a universal remote to JVC TV. It includes the GE universal remote codes for JVC TV and RCA Universal remote codes for JVC TV.

3 Digit Universal Remote Codes for JVC TV

066	082	091	008	051
040	404	231	141	405
190	160	030	123	182
901	089	141	059	065
055	013	217	560	642
164	570	533	405	190
160	030	026	012	559
655	557	066	094	024

4 Digit Remote Codes

1060	0607	1029	1430	1114
1111	1011	4107	1227	1133
1227	1911	0069	2005	1109
5311	1307	1281	0650	1058
1131	1182	0023	0093	0308
0802	1117	1048	5206	1123
1180	0418	0771	0060	0993
5204	1080	0311	3841	1180
0053	0481	1818	1009	5199
0321	5071	1795	0141	1795
5203	1010	0617	1055	0731
3650	2118	0653	4201	1115
1096	5170	0067	2321	0508

5 Digit Code for JVC TV

12859	1193	17706	10650
12561	12049	10463	12463
11245	10683	10731	12811
11349	11670	10169	19405
13829	13650	14273	14808
10160	10053	18016	10053
11774	11892	10069	12265

3 Digit JVC HDTV Remote Codes

060	055	054	013
089	067	065

4 Digit JVC HDTV Remote Codes

1131

1130

1227

4 Digit JVC VCR Remote Codes

3055	3014	3007	3006
3005	3123	3122	3121
3118	3067	3060

JVC DVD 4 Digit Remote Codes

2217	2096	2090	2047
2028	2017	2206	2204
2166	2115	2097

RCA Universal Remote Codes for JVC TV

1182	1396	1012	1060	1158
1393	1067	1066	1430	1123
1013	1239	1065	1055	1157
1269	1285	1054	1063	1159

GE Universal Remote Codes for JVC TV

0069	0141	0060	0026	0065
0012	0923	0067	0197	0247

💡 For One For All Universal Remote, you can use the above JVC TV codes to program it.

Philips Universal Remote Codes

0321	0326	0993	0308	0607
0508	0204	0802	0108	0715

Magnavox Universal Remote Codes

0053

0038

Sky Remote Code for JVC TV

2146

3747

0681

Note: If you have a Seiki TV, you shall find the Seiki TV remote codes and its programming guidelines.

How to Program Universal Remote to JVC TV (Without Codes)

1. Turn on your JVC Smart TV using the physical power button.

2. Press and hold the TV/DVD/CBL and OK/SEL buttons simultaneously for about 3-5 seconds.

📌 If the LED light blinks on the remote, it is ready for the setup.

3. Aim the remote at the JVC TV and press the CH+ and CH- buttons simultaneously.

📌 You can see on/off signals on the universal remote.

4. Next, press the Up and Down buttons repeatedly until your TV is turned off.

💡 The remote will search for the code and verify it by itself. If the code is found, the JVC TV will turn off.

5. Further, press the Power button to turn on the JVC TV.

📌 Randomly click the remote buttons to test whether it works or not.

6. Finally, click the Device button to store the code.

How to Program Universal Remote to JVC TV (Manual Method)

1. Switch on your JVC TV by pressing the TV power button.

2. Press the TV button on your JVC universal remote.

3. Further, press and keep hold of the SETUP button until the indicator light flashes.

💡 This indicates that the remote has gone into Learning mode.

4. Go through the user manual of the universal remote and enter the correct code.

5. After entering the code, aim the remote at the TV and press and hold the Power button.

6. If the JVC TV is turned off, release the Power button.

Note: Check out the guide on LG TV Remote Codes and the steps to program Universal Remote to the LG TV.

How to Program Universal Remote to JVC TV (Code Search)

1. Initially, press the Power button on the JVC TV to turn it on.

2. Next, press and keep hold of the SETUP button for a few seconds.

3. Once the indicator light flashes, enter 9-9-1 using the number buttons.

4. Further, press and hold the Power and Channel Up buttons until it turns off the JVC TV.

5. Later, press the Power button to turn it on.

📌 If the action is successful, you have programmed the universal remote to the JVC TV.

Alternate Way to Program JVC Universal Remote

1. Manually switch on the JVC TV by pressing the Power button on the TV.

2. Press the MUTE and SELECT/OK buttons repeatedly until the green light on the remote flashes twice.

3. Refer to the 5 Digit Remote Codes given on the table and key in the first digit of the code.

💡 After entering the first digit, the green light will blink twice for confirmation.

4. Further, enter the remaining four digits of the code.

5. Once you have entered it, aim the remote at your JVC TV and press the Power button.

💡 If the JVC TV is not turning off, repeat the same steps with an alternate code.

Frequently Asked Questions