How to Fix Sanyo TV Remote Not Working
Though Sanyo TV is considered to be the best television brand, sometimes the Sanyo TV remote may not work. There are plenty of reasons, like physical damage, signal blockage, etc., for the Sanyo TV remote not working. These issues are common, and they can be easily fixed by simple troubleshooting methods discussed below.
Why is Sanyo TV Remote Not Working
The Sanyo TV remote may fail to work for the following reasons.
|1||Because of insufficient charge on the batteries, the remote will stop working.|
|2||The remote may be defective due to physical damage or liquid spillage.|
|3||Sanyo TV remote won’t be able to receive signals due to obstruction in between the line of sight.|
|4||If there is any issue with the remote sensor or the IR, the remote won’t work.|
How to Fix Sanyo TV Remote Not Working
Follow these troubleshooting methods to resolve Sanyo TV remote not working problems.
Replace the Remote Batteries
If the Sanyo TV remote batteries are weak or dead, then probably the remote will stop working. So, it is mandatory to replace old batteries with new ones.
- Remove the batteries from the battery compartment.
- Clean the compartment with a clean and soft cotton cloth
- Replace the old batteries with newer ones (use branded batteries).
- Close the battery cover and check if the remote is working without any issues.
Clean the Remote Buttons
The remote buttons will get stuck inside due to dirt on the edges of the button. Therefore, it is recommended to clean the debris from in and around the remote regularly. You can clean the Sanyo TV remote with proper alcohol cleaners or microfiber cloth. Also, remove the batteries from the Sanyo TV remote and keep pressing all the buttons one by one to fix if the buttons are jammed inside.
Remove the Obstacles
If there is an object between the Sanyo TV and the remote, the remote won’t work due to obstruction. As the Sanyo TV remote works by sending IR signals to the sensor, you must operate the remote in a direct line of sight. Therefore, remove such objects as speakers, furniture, and soundbars, and ensure that there are no objects between the TV sensor and the Sanyo remote. Also, remember that the optimum range for operating the remote is less than 30 feet.
Perform Camera Test
Since the remote uses the IR, you should ensure that the Sanyo TV remote sensor isn’t blocked or damaged. To check so,
- Open the camera app and point the remote head to the smartphone’s camera lens
- Press the remote keys one by one and check whether you can see the IR signal
- If you don’t see any IR light using the camera, then the remote is found defective.
Reboot your Sanyo TV
A soft reset or reboot solves many problems, especially when the remote is not working.
- For this, remove the batteries from the Sanyo TV remote and keep them aside.
- Next, unplug the Sanyo TV cord and keep it unplugged.
- Wait for 60 seconds and reconnect the TV cord to the power outlet.
- Also, insert the batteries back into the remote.
- Check now whether the remote works without any problems.
Reset Sanyo TV Remote
After trying the above ways, if the remote still does not work properly, then there might be an issue inside the Sanyo remote, So you can reset your remote.
 Remove the batteries from the remote.
 Hit the Power button for 30 seconds.
 Wait for 60 seconds and insert the batteries back into the remote and see if the remote is working fine.
Program Sanyo TV Universal Remote
If the Sanyo TV remote does not work even after resetting it, then you can simply go for the replacement Sanyo TV universal remote. Here are the steps to program the Sanyo TV remote
 On the remote, press and hold the Code search key until you see the light blinks.
 Then, enter the universal code for Sanyo TV, i.e., 049. If this code does not work, try using the following codes: 054, 025, 069, or 023.
 If you’ve entered the wrong code, the TV light will start to blink rapidly.
 After entering the code, point the remote straight to the TV and press the On/ Off button. If the buttons work, it means that the remote is programmed successfully to your TV.
If you are not interested in spending money on buying a Sanyo TV replacement remote or universal remote, then you can use Sanyo TV remote apps. One of the best IR blaster remote apps is Remote Control For Sanyo TV. You can install this app on your smartphone from the Play Store and can use it to control your Sanyo TV.
This happens when your remote batteries are weak or dead. So, replace the old batteries with new ones and check if it works properly.
No, there is no official Sanyo TV remote app. However, there are plenty of third-party apps available on the Play Store. You can download them and use them to control your TV.