Universal Remote Codes for Sanyo TV with Programming Guide

Sometimes electronic devices may stop working due to wear and tear. There can be different reasons for the Sanyo TV remote to stop working. Therefore, you can use the universal remote as an alternative. However, you should learn the Sanyo TV remote codes. Luckily, there are three simple ways to program a universal remote to the Sanyo TV, which is similar to Sceptre TV Remote Codes and the programming guidelines.

List of Remote Codes for Sanyo TV

Here is a complete list of Sanyo TV universal remote codes.

5 Digit Remote Codes

10798	10146	10107	10036	10054
14675	10893	10799	13488	10159
11907	11142	10088	11362	10154

4 Digit Remote Codes

2279	1037	0373	2279	0412
0009	0486	1208	0170	0370
0108	0508	1163	0208	2676
1667	2461

3 Digit Remote Codes

004	108	025	013
023	110	069	180
054	209	049

Sanyo DVD Universal Remote Codes

0873	0896	2050	0895
2393	0695	0670	1919

Sanyo Soundbar 3 Digit Remote Codes

661

611

627

590

683

5 Digit Remote Codes for Sanyo Soundbar

20595	20149	21531	10250
21781	20000	30189	20149
20081	30531	20047	10154

Note: You shall learn to set up and use the Sanyo TV Remote App if you don’t want to use the physical remote controller, irrespective of the reason.

RCA Universal Remote Codes for Sanyo TV

The following are the 3, 4, and 5-digit remote codes for RCA Universal Remote.

3 Digit RCA Remote Codes

021	180	169	004	162
196	048	080	057	017
056	077	049	058	089
039	052	107	073

4 Digit RCA Remote Codes

4398	3697	2434	1480
0706	1142	0088	1362
0054	1756	3861	0799
2049	0893	0154	3488
3183	0885

5 Digit RCA Remote Codes

14398	13183	12434	13488	11756
11564	11480	11362	11785	10885
10054	11142	12049

GE Universal Remote Codes for Sanyo TV

0049	0180	0108	0012
0268	0081	0110	0097
0004	5018	5014	5001
5430	5139	5412	5407
5234	5233	5224	5191
5089	5055	5052	5038
5034	5029	5022	5151
5138	5118	5032

How to Program Universal Remote to Sanyo TV: Keycode Method

1. Switch on your Sanyo TV by manually pressing the power button.

2. Go ahead to hit the TV button on the remote.

3. Press and hold the SETUP button until the remote indicator light flashes.

💡 You have activated the Learning mode on the universal remote.

4. Refer to the user manual and enter the correct keycode.

5. Aim the remote at the Sanyo TV. Then, press and hold the Power button until the TV gets turned off.

📌 As a result, the universal remote will automatically recognize the exact remote code.

6. If the code has been identified, the Sanyo TV will turn off. Release the Power button.

7. Press the Power button on the remote to switch on the Sanyo TV.

💡 If the remote pairing is unsuccessful, repeat the same steps with another remote code.

Note: Meanwhile, you shall check out the Panasonic TV Universal Remote Codes and the steps to program the remote controller.

How to Program Universal Remote to Sanyo TV: Code Search

1. Press the Power button on the Sanyo TV to turn it on.

2. Further, press and hold the SETUP button.

3. Next, enter the code 9-9-1 using the number buttons.

4. Press and hold the Power and Channel Up buttons until the Sanyo TV is turned off.

5. If the Sanyo TV has turned off, it has been programmed successfully.

6. Finally, press the Power button on the remote to switch on your Sanyo TV.

How to Program Universal Remote to Sanyo TV: Manual Method

1. Turn on the Sanyo TV by pressing the physical power button.

2. Initially, press the TV button on the remote once.

3. Next, press and hold the SETUP button on the universal remote.

4. If the indicator light starts blinking, enter the remote code manually.

📌 Based on the universal remote brand you have, input the exact code to program the remote.

5. Once you enter the code, point the remote on the TV and press and hold the Power button.

6. If the Sanyo TV turns off, it indicates that the remote has been programmed.

Frequently Asked Questions