Hitachi TV Remote Not Working: Reasons and DIY Fixes
If Hitachi TV remote is not working, you don’t need to worry anymore. The remote may stop working only if the batteries are running out of charge, signal blockage, or any physical damage to the remote’s hardware. Remember that buying a Hitachi TV replacement remote is not a solution to these problems. So, we recommend users try these fixes to troubleshoot the issue.
Why is My Hitachi TV Remote Not Working
The Hitachi TV remote won’t send any commands if it has been affected by these reasons.
| SCENARIO | REASONS |
|---|---|
| 1 | The remote’s batteries may become weak or fully drained over time |
| 2 | Because of physical damage, the remote’s hardware may become faulty |
| 3 | If you are using a Hitachi IR remote, obstructions will affect the remote usage |
| 4 | Technical problems with the Hitachi TV can be the reason if the remote doesn’t work |
DIY Fixes for Hitachi TV Remote Not Working
You can try these workarounds one by one to fix the Hitachi Smart TV remote not working issue.
Change the Batteries
The major reason for the Hitachi TV remote to stop working is the batteries. If the batteries have insufficient charge, you will be experiencing issues like slow responsiveness, and the remote will send commands more slowly than usual. Therefore, the only solution is to replace the batteries with newer ones. Before replacing the batteries, you should clean the battery terminals to make sure that there is no dust inside the battery compartment.
Power Cycle the Remote
The flea power may also lead the Hitachi TV remote to stop working unexpectedly. So, you have to drain flea power instantly by doing a simple trick. Pop out the batteries from the remote control. Press and hold the Power button for at least 20 seconds to drain the residual power. Next, reinsert the batteries into the remote based on their positive and negative polarities.
Note: Power cycling is a common troubleshooting method that will help to fix the Vu TV remote not working issue.
Test the IR Signals
If you are using an infrared-based remote control, ensure that the Hitachi remote’s LED is not defective. There is an easy way to check whether the Hitachi TV remote is capable of sending IR signals to the TV through a camera test.
- Open the Camera app on your smartphone.
- Aim the top end of the remote towards the smartphone’s rear camera.
- Now press the remote keys randomly and check if you can see the blinking light on the smartphone screen.
If you cannot see any light, you can confirm that the remote’s LED has an issue. In this case, you can either repair the remote or buy a replacement remote for Hitachi TV.
Check via the Remote Sensor
If you are using Hitachi smart remote control, it can detect your hand movement using a sensor. You will get an air-mouse navigation control on the TV screen if your hand is detected by the remote sensor. Follow these steps to check if the Hitachi Android TV remote is working or not.
- Point the remote control at the TV receiver.
- Press the Up arrow button on the remote.
- Following that, press the Down arrow button.
If you see a mouse pointer on the TV screen, then the remote has no issues. Otherwise, you need to replace the batteries or charge the remote immediately if it has a charging port at the bottom.
Cleaning the Dirt
Because of excessive dirt or debris, some remote buttons may get stuck inside. As a consequence, you won’t be able to operate the remote control until the buttons are released. To fix this issue, you can disassemble the remote and follow these steps.
- Take a microfiber cotton cloth dipped in a screen cleaner.
- Wipe the cloth over the dust particles to clear the debris on the remote keys.
- Make sure to clean the TV receiver as well if there is a smudge on it.
- Assemble the remote back again.
- Hardly press all the remote keys one by one for 5-6 times.
- This would drain the residual power if anything is stored in the remote.
After that, test whether the Hitachi TV remote is working without any problems.
Clear the Obstructions
At times, objects like soundbars, speakers, or any furniture items may obstruct the remote signals. Naturally, the infrared remote needs a direct line of sight to function properly. Make sure that there are no objects between the TV sensor and the Hitachi remote. Also, it is recommended to use the remote in a closer range of fewer than 30 feet. If it exceeds the range, then it won’t work.
Power Reset Hitachi TV
If Hitachi TV is not turning on with the remote, you can power reset the TV to fix the issue. You can definitely try this method if you want to reset Hitachi TV without a remote. Keep in mind that soft resetting won’t uninstall the apps or clear the data, unlike factory resetting. Unplug the TV cord from the wall socket. Press the physical power button and hold it for 30 seconds. This will drain the unwanted residual power from the TV. After that, you can turn on the TV and check if the remote control is properly working.
Use the Remote App
In case the remote has been broken or lost, you can use the Hitachi TV remote app to operate your TV without a remote. If you want to control Hitachi Android TV, you can use the Google TV app as a virtual remote. For Hitachi Roku TVs, you can use The Roku App (Official) to control your TV from an Android or iPhone.
Bonus Fixes
If you don’t want to use the remote app, you can buy a brand-new universal remote to control your Hitachi TV. When compared to original remotes, you can get them for the lowest price. Most universal remotes require remote programming to use, so you have to refer to the user manual to program it with suitable remote codes.
Frequently Asked Questions
You can use the physical keys on the Hitachi TV to increase or decrease the volume.
You can follow the troubleshooting ideas discussed in this guide to fix the remote sensor not working issue.
