Technika TV Remote Not Working: Causes & Solutions
Although Technika TV is considered to be the best TV brand, the remote may go unresponsive at some point. If your TechnikaTV is dysfunctional with any of the remote commands, it may be due to signal obstructions, pairing issues, or unknown errors. These problems are frequent in all smart TV remotes, so you don’t have to buy a universal remote right away. Instead, you can try these troubleshooting methods to fix the Technika TV remote not working issue.
Why is My Technika TV Remote Not Working
The Technika TV remote won’t send any commands if it has been affected by these reasons.
|1||The remote will stop working due to insufficient or weak batteries|
|2||When there is an issue with an infrared signal receiver or sensor|
|3||Due to a speck of dirt, the keys may stuck inside the remote|
|4||If there is a visible sign of physical damage on your remote|
|5||Because of signal blockage, the IR signals won’t be sent to the TV|
How to Fix Technika TV Remote Not Working
You can try these workarounds individually to fix the Technika TV remote not working issue.
Change the Batteries
The batteries are the main reason for the Technika TV remote to stop working. If the batteries have insufficient charge, you will be experiencing such a remote issue. Therefore, the only solution is to replace the batteries with newer ones. Before that, you should clean the battery terminals with a microfiber cloth dipping them in 99% isopropyl alcohol. Clean it thoroughly and ensure that there is no dust inside the battery compartment.
Clear the Obstructions
Most of the time, the TV does not work with the remote actions if the obstacles stop the path between the remote and the TV. Always keep a clear path while operating the remote controller. Additionally, clean the IR emitter on the remote at least once a week. This is because the IR emitter may be covered with dust particles. As a result, your remote won’t respond to any commands.
Cleaning the Dirt
Because of excessive dirt or debris, some remote buttons may get stuck inside. As a consequence, you won’t be able to operate the remote control until the buttons are released. So clean the remote buttons frequently with a soft cloth or brush to remove the settled remote dust particles on the remote. After cleaning the buttons on the remote, ensure to check the remote with your TV.
Note: Accumulation of dirt on the remote keys is one of the reasons for the Logik TV remote not working.
Test the IR Signals
If Technika TV is not responding to the remote or buttons, ensure that the remote’s IR emitter is not defective. There is an easy way to check whether the Technika TV remote is capable of sending IR signals to the TV through a camera test.
- Open the Camera app on your smartphone.
- Aim the top end of the remote towards the smartphone’s rear camera.
- Now press the remote keys randomly and check if you can see the blinking light on the smartphone screen.
- If you can’t see a light, you can confirm that the remote’s LED has an issue and you can buy a new replacement remote.
Power Cycle Technika TV
Power cycling is the quick solution to fix any external factors causing the problems in the Technika TV. Moreover, this will reset the Technika TV without deleting the data and the installed apps. To perform a soft reset, unplug the TV adapter from the power source. Keep the TV adapter unplugged and press the TV Power button for at least 60 seconds. After a minute, plug the TV adapter back into the power outlet to turn it on. Test the Technika TV remote to see whether it is working or not.
Power Cycle Remote
 Remove the batteries from the remote control.
 Press and hold the Power button for at least 20 seconds to drain the residual power.
 Next, reinsert the batteries into the remote based on their positive and negative polarities.
 Test the remote control whether it works without any issues.
If your Technika TV remote control is no longer working after troubleshooting, you can use the Technika TV remote app to control your TV. If you are not interested in using the remote app, you can buy a universal remote instead. You should know the Technika TV remote codes to program a universal remote to your TV.
Yes, you can use the SURE remote app to control Technika TV from an Android or iPhone.
Locate the physical Power button on Technika TV. Press and hold the Power button for 5-10 seconds until the TV is turned off. After a few minutes, again press the Power button and keep hold until it turns on the TV.