Logik TV Remote Not Working: Main Reasons with Fixes
One of the most frequent problems Logik Smart TV users encounter is the remote not working. Discharged batteries and signal interferences are the main reasons responsible for imparting the issue. For such reasons, you don’t have to buy a new replacement remote. Instead, we recommend trying these workarounds to fix the Logik TV remote not working issue.
Why is Logik TV Remote Not Working
If the Logik TV remote stops working unexpectedly, it may be due to the following reasons.
| SCENARIO | REASONS |
|---|---|
| 1 | Because of weak or drained batteries in the remote |
| 2 | Issues with the Logik remote’s IR sensor |
| 3 | The remote keys may be jammed due to a speck of dirt |
| 4 | If infrared signals have been blocked by obstructions |
| 5 | Because of physical damage to the remote’s hardware |
| 6 | If the remote has been unpaired due to a long-range |
How to Fix Logik TV Remote Not Working
The following troubleshooting methods will help you resolve the Logik TV remote when it fails to respond.
Replace the Batteries
The remote’s batteries can last between 3-6 months based on your regular usage. So, they might run out of charge or dead over time. Hence, it is mandatory to check and replace the remote batteries when you get a lagging response. Eject the old batteries from the battery compartment and replace them with newer ones. Ensure to insert the batteries into the battery compartment based on their polarities and check if Logik Smart TV remote is working or not.
Check the IR Signal
As the Logik TV remote uses the IR emitter, it is mandatory to check the IR signal. Grab your smartphone and turn on the camera. Point the remote sensor in front of your smartphone’s camera. If you can be able to see a flashing light (IR emitter), there is no issue with your remote. If the flashlight is invisible, it means that the remote IR emitter has become faulty.
Note: IR emitter test helps to find out if the Realme TV remote is not working even after changing batteries.
Remove Dirt or Debris
Another reason for the Logik TV remote button not working is because of too much dirt. This makes your button much tighter or remote keys may even be jammed and prevents it from working properly. Use a microfiber cloth or a paper towel to clean the outer part of the device and use the cotton swab, tooth picker, or earbuds to clean the dirt in and around the buttons. Make sure to clean your remote controller once a week by dipping the cloth in 99% isopropyl alcohol.
Clear the Obstructions
If you want your Logik TV to respond properly to remote commands, the signal must be strong. If you have kept any objects in between the TV and the remote, move them aside because they might block the infrared signals. Except for voice remote, IR-based remote controller normally requires a direct line of sight to work.
Use the Remote in a Range
Most IR remotes will work properly only if the remote is operated at a closer range to the TV. Basically, you can use the Logik remote from a maximum distance of up to 10 meters. As mentioned earlier, it is necessary to clear obstructing objects such as soundbars or showpieces if anything were placed in front of the set-top box to receive signals better.
Note: Like IR remotes, there are a few best IR blaster remote apps to control Logik TV from an Android smartphone.
Power Cycle Logik TV
Power cycling the TV helps you in clearing the temporary bugs and errors. It is most preferable when you have voltage fluctuations that may prevent the TV from responding to remote commands.
[1] Turn off your Logik TV and unplug the power cord of your TV.
[2] Wait for up to two to three minutes.
[3] Next, connect the power cord back and turn on your Logik TV and check whether the remote is working fine or not.
Power Cycle Remote
In some cases, the remote may not be working due to residual power left in the remote. This is a rare issue that may occur if you haven’t replaced the drained-out batteries with a pair of fresh ones.
[1] Remove the batteries from the battery compartment.
[2] Then, press and hold each button for a few seconds.
[3] Now, insert the batteries back into the compartment and check if the remote is working or not.
Buy a Universal Remote
If the Logik remote control is not working due to physical damage, you can replace it with a new remote. If you feel that the original remote is expensive, you can purchase a universal remote like Logitech Harmony 650. It is good to have as it can control more than one device with a single remote. You need to use Logik TV remote codes for programming a universal remote.
Alternatively, you can use the Logik TV remote app on your Android smartphone. This app can perform all remote functions like an original remote.
FAQ
Eject the batteries from the remote and press all the buttons. Then, insert the batteries back into the remote and this will reset your Logik remote.
Yes, you can use the Logik TV remote app to control your Logik TV without a remote. You can download this app from the Play Store and control the TV using your Android device.
