
Soniq TV Remote Not Working | Causes and DIY Fixes
Is your Soniq TV remote control not working even after replacing the batteries? Don’t worry. It happens due to specific reasons like signal blockage, accumulation of dirt, stuck buttons, and more. These problems may recur for all remotes so it is better to try the troubleshooting methods to fix the issue instead of buying a replacement remote for Soniq TV.
In this article, you will learn preventive measures and workarounds to fix the Soniq TV remote not working issue.
Why is Soniq TV Remote Not Working
If the Soniq TV remote has stopped working, it could be due to the following reasons.
SCENARIO | CAUSES |
---|---|
1 | Because of insufficient charge on the batteries, the remote will stop working |
2 | The remote may be defective due to physical damage or liquid spillage |
3 | The remote won’t be able to receive signals due to obstruction in a line of sight |
4 | If there is any issue with the TV sensor or the IR emitter, the remote won’t work |
5 | If the remote buttons are jammed due to an excessive dirt on its edges |
How to Fix Soniq TV Remote Not Working Issue
You can try these workarounds one by one to fix the Soniq TV remote not working issue.
Change the Batteries
The major reason for the Soniq TV remote to stop working is the batteries. If the batteries have insufficient charge, you will be experiencing issues like slower responsiveness than usual. Therefore, the only solution is to replace the batteries with newer ones. Before replacing the batteries, you should clean the battery terminals to make sure that there is no dust inside the battery compartment.

Note: Battery replacement is the best workaround that can even resolve the JVC Smart TV remote not working issue.
Power Cycle the Remote
The residual power may also lead the Soniq TV remote to stop working unexpectedly. So, you have to drain out the flea power to make the remote work. Pop out the batteries from the remote control. Press and hold the Power button for at least 20 seconds to drain the residual power. Next, insert the batteries back into the remote based on their positive and negative polarities.

Test the IR Emitter
If you are using an infrared-based remote control, ensure that the Soniq TV remote’s LED is not defective. There is an easy way to check whether the Soniq TV remote is capable of sending IR signals to the TV through a camera test.

- Open the Camera app on your smartphone.
- Aim the top end of the remote towards the smartphone’s rear camera.
- Now press the remote keys randomly and check if you can see the blinking light on the smartphone screen.
If you cannot see any light, you can confirm that the remote’s LED has an issue. In this case, you can either repair the remote or buy a universal remote for Soniq TV.
Clean the Remote Buttons
In some cases, dirt or dust on the remote may be the reason for the Soniq TV remote not working. As a result, the dirt even goes inside the button, causing buttons to stuck inside. Therefore, it is necessary to clean the TV remote with an alcohol solution. Later, remove the batteries from the TV remote and keep pressing all the buttons to fix if the buttons are jammed inside.

Note: For best cleaning results, you can use a microfiber cloth dipped in 99% isopropyl alcohol and wipe away the dust.
Clear the Obstructions
If there is an object between the Soniq TV and the remote, the remote won’t work due to obstruction. As the Soniq TV remote works by sending IR signals to the sensor, you must operate the remote in a direct line of sight. Therefore, remove such objects as speakers, furniture, and soundbars, and ensure that there are no objects between the TV sensor and the Soniq TV remote.
Soft Reset Soniq TV
A soft reset or reboot solves many problems, especially when the Soniq TV remote is unresponsive to the commands.
[1] Unplug the Soniq TV cord and keep it unplugged.

[2] Wait for 60 seconds and reconnect the TV cord to the power outlet.
[3] Now, check whether the remote works without any problems.
Note: Soft resetting the TV is a useful workaround that helps in fixing the Teac TV remote not working issue.
Hard Reset Soniq TV
If rebooting the Soniq TV does not help in fixing the remote issue, you can try a factory reset. Press the Reset button present on the Soniq TV for 3-5 seconds and this will restore the device to its factory settings. Now, turn on the TV and see if the remote is working properly or not. But, while performing the factory reset, all the stored data and information will get deleted.
Contact Soniq Support
If the above-mentioned ways do not work out or fail to fix the issue, then you can visit the Soniq TV Help Center or directly call their customer care at 1300 765 663 and tell them the issue. One of their executives will assist you and tell you the right solution. If they recommend buying a replacement remote, you can purchase it from the official store.
Bonus Fix
The above methods will not work if the Soniq TV remote is physically damaged. Hence, it is better to buy a new Soniq TV remote. When compared to original remotes, you can buy a universal remote for the lowest price. If you are not interested in buying a Soniq TV replacement remote, you can use the Soniq TV remote app to control your TV from a smartphone.
FAQ
Yes. You can turn on the Soniq TV without a remote by using a physical button present on the TV panel or with the Soniq TV remote app.
As Soniq TV has a reset button on the TV panel, you can press that button for a few seconds to factory reset your Soniq TV. If there is no reset button, you can use the IR blaster remote app to reset the TV.