Digihome TV Remote Not Working: Causes and Fixes
The Digihome TV remote not working is the most frustrating issue if it occurs. The remote may stop working if it has drained batteries, signal interference, and any of the buttons are stuck. Many people forget to address this issue at the start, mistaking that the remote will no longer be working. We recommend users fix the Digihome TV remote problems with the methods listed here.
In this article, you will learn the reasons and solutions to fix the Digihome TV remote not working issue.
Reasons for Digihome TV Remote Not Working
If the Digihome TV remote stops working unexpectedly, it may be due to the following reasons.
| SCENARIO | REASONS |
|---|---|
| 1 | If the Digihome TV remote keys are stuck due to excessive dirt |
| 2 | Because of signal blockage, the IR signals won’t be sent to the TV |
| 3 | Because of weak or drained batteries in the remote |
| 4 | If there is a visible sign of physical damage on the remote |
| 5 | Other infrared-based devices may disrupt the remote signals |
| 6 | Because of power fluctuations, the TV won’t receive remote commands |
How to Fix Digihome TV Remote Not Working
Follow these workarounds to troubleshoot the Digihome TV remote and make it work without problems.
Check and Replace the Batteries
Drained or weak batteries are the main reason for the Digihome TV remote not working. It is mandatory to check and replace the remote batteries if they are poor or weak. Remove the battery cover first, and insert the pair of new batteries in the battery compartment. Make sure to insert batteries based on their positive and negative polarities. Finally, replace the battery cover and check whether the remote is working.
Note: This technique will help you solve the Polaroid TV remote not working issue if it is due to batteries.
Clear the Obstructions
In some cases, furniture items or showpieces on the TV unit may block the remote’s infrared signals. Consequently, the Digihome TV remote won’t work until you relocate the obstructing stuff. Also, ensure that the remote is in a direct line of sight and use the Digihome TV remote in an optimum range of less than 30 feet.
Clean the Remote Buttons
If the dust particles are settled inside the remote, it is why the remote is not working properly. Make sure to clean your remote controller once a week by dipping the cloth in 99% isopropyl alcohol and rubbing the buttons firmly. Use a microfiber cloth or a paper towel to clean the outer part of the device, and use the cotton swab or toothpick to clean the dirt in and around the buttons. After cleaning the buttons on the remote, ensure to check the remote with your TV.
Test the IR Signals
As the Digihome TV remote uses the IR emitter, it is mandatory to check the IR signal. Grab your smartphone and turn on the camera. Point the remote sensor in front of your smartphone’s camera. If you can be able to see a flashing light, there is no issue with your remote. If the flashlight does not appear, it means that the remote IR emitter has become faulty. You can buy a new replacement remote for your Digihome TV.
Note: If you don’t want to buy a remote, use the IR blaster remote app to control the TV from your Android device.
Power Cycle Digihome TV Remote
In some cases, the remote may not work if there is residual power left in the remote. This is a rare issue that may occur if you haven’t replaced the drained batteries or if the remote is not in use for a long period.
[1] Remove the batteries from the battery compartment.
[2] Then, press and hold each button for a few seconds.
[3] Now, insert the batteries back into the compartment and check if the Digihome TV remote is working or not.
Soft Reset Digihome TV
Power cycling is the quick solution to fix any external factors causing the problems in the Digihome TV. Moreover, this will reset the Digihome TV without deleting the data and the installed apps. To perform a soft reset, unplug the TV cord from the power source. Keep the TV adapter unplugged for at least 60 seconds. After a minute, plug the TV adapter back into the power outlet and press the Power button to turn it on. Test the TV remote to see whether it is working or not.
Contact Digihome TV Support
Even after trying all the above-listed methods, if the remote issue persists, the last option is to contact Digihome TV Customer Support. You can tell the issue you’re facing with the remote, and the executive agent will guide you with the relevant solution. You can also contact 0800 3444 28 and talk to the TV service agent directly.
Use the Digihome TV Remote App
If the Digihome TV support recommends buying a new remote, there is an alternative way to control the TV. You can install the Digihome TV remote app as a virtual remote if you have an Android device. However, your smartphone should have an IR blaster or connect the TV and phone to the same WiFi network to use the remote app.
Buy a New Remote
If you are not interested in using the remote app, you can buy a universal remote instead. You can purchase a universal remote like Logitech Harmony 650 as it can control more than one device with a single remote and is available at Amazon. Nonetheless, you need to know the Digihome TV remote codes to program a universal remote with your TV.
FAQ
Press the Power button on the TV panel to turn on the Digihome TV without a remote. Similarly, to turn off the TV, press the Power button again.
Yes, you can use the Digihome TV remote app to control your Digihome TV without a remote. You can download this app from the Play Store and control the TV using your Android device.
