Akai TV Remote Not Working | Causes and DIY Fixes
Although Smart TVs last for 5-7 years, the sad thing is that the TV remote that comes with it won’t last. If the Akai TV remote is not working, there are numerous reasons causing it. Remember that man-made errors can also be responsible for the remote to become dysfunctional. Therefore, you can try the troubleshooting methods to rectify the remote not working issue. If the Akai TV remote has been broken, purchasing a universal remote as a replacement is a better option.
In this guide, you will learn the possible workarounds to fix the Akai TV remote not working issue.
Why is the Akai TV Remote Not Working
| SCENARIO | CAUSES |
|---|---|
| 1 | If the remote batteries are weak or it is no longer functioning |
| 2 | Due to the accumulation of dirt, the remote buttons may be stuck |
| 3 | Because of liquid spillage, the remote’s hardware will be faulty |
| 4 | If an object is placed in front of the TV sensor, it will block the remote signals |
| 5 | Due to wear and tear, the Akai TV remote may be defective |
DIY Fixes for Akai TV Remote Not Working
If you have trouble controlling the Akai TV with the remote, follow these techniques to resolve the issue.
Replace the Old Batteries
Batteries are the primary reason why the remote button presses don’t work. So, check the batteries on your remote and replace the old ones with fresh batteries. Follow the below instructions to replace Akai TV remote batteries.
- Remove the batteries from the remote compartment.
- Insert fresh batteries according to their positive and negative polarities.
- Ensure that the battery compartment is clear. If there is dirt, use a cloth to clean it before inserting the batteries.
- Test whether the remote works after replacing the batteries.
Note: Using the same procedure, you can fix the Teac TV remote not working issue if it is due to drained batteries.
Test IR Emitter on the Remote
Make sure that the IR sensor on the remote is working fine. If there is any damage to the IR emitter, the remote will stop working. You can use the following steps to check whether the IR emitter is functional or not.
- Open the Camera app on your smartphone.
- Point the remote’s IR emitter head towards the camera and press the remote buttons randomly.
- If the light blinks, there is no issue with the remote. If not, you should repair the remote or buy a replacement remote.
Clear the Obstructions
In general, an infrared-based TV remote requires a direct line of sight to work. Therefore, you should clear the obstacles placed before the TV and the remote. If any obstacles interfere with the path between the remote and the TV, the remote won’t work properly. Ensure that objects like speakers and soundbars are not blocking the signal receiver. Make sure to operate your TV remote at a distance of fewer than 10 feet.
Remove Dirt or Debris
Another reason for the Akai TV remote not working is because of too much dirt stuck on the remote keys. So, make sure to clean the IR blaster on the remote, as there is a chance the LED IR blaster might get covered with dust particles. Therefore, it is necessary to clean the Akai TV remote using a microfiber cotton cloth with 99% isopropyl alcohol.
Power Cycle Akai TV
Power cycling is another simple method to fix the Akai TV remote problems without using a remote. This technique will also help if the Akai TV is not turning on with the remote.
[1] Unplug the Akai TV cord from the outlet and keep it unplugged for 30 seconds.
[2] Now, plug the TV cord back into the source.
[3] Press the Power button to turn on your Akai TV and check whether the remote is working fine or not.
Power Cycle Akai TV Remote
There is a chance for the remote to become dysfunctional if it is not in use for a long period. Because of that, flea power will be settled in the remote’s hardware, which will make the Akai TV remote unresponsive to the commands.
[1] Remove the batteries from your Akai TV remote.
[2] Press and hold the Power button for 30 seconds to drain all the power in the remote.
[3] Re-insert the batteries back inside the remote.
[4] Check whether the Akai TV remote is functioning or not.
Soft Reset Akai TV
When power cycling does not help you fix the remote issues, you can try resetting. You can follow the guidelines below to reset the Akai TV without a remote.
[1] Turn off the TV and unplug the TV cord from the power socket.
[2] Press and hold the Power and Volume – buttons on the back side of the TV for a few seconds.
[3] While holding these buttons, plug the TV cord into the source and turn it on.
Now check if the Akai TV remote functions are working properly.
Contact Akai Support
If the above-mentioned ways don’t fix the issue, the last option is to contact Akai Support directly. You shall even reach out to their customer service and explain the issue you’re facing, and they will help you to find the necessary solution easily.
Use Universal TV Remote or Akai TV Remote app
If the Akai TV remote is defective or broken due to physical damage, the only way is to buy a new replacement Akai TV remote. Besides using the original remote, you can also use the universal remote or you can use the Akai TV remote app on your smartphone to control the TV.
FAQ
You can use the Akai TV Remote app or physical buttons on the TV panels to control the Akai TV without a remote.
Press the Power button located on the back side panel to turn on the TV. If the physical button does not work, unplug the TV cord from the socket and replug it, and this will automatically turn on your TV.
