![How to Program Universal Remote to Sony TV [2 Ways]](https://smarttvremoteapp.com/wp-content/uploads/2023/05/How-to-Program-Universal-Remote-to-Sony-TV.jpg)
How to Program Universal Remote to Sony TV [2 Ways]
You may across situations like Sony TV remote not working because of faulty hardware. If you are looking for a cheaper replacement remote, you shall buy a universal remote instead of buying an original remote from its official website. As universal remotes are capable of controlling multiple devices, it requires each device to be programmed with a universal remote with or without a code. Fortunately, there are two ways to program a universal remote to Sony TV.
How to Program Universal Remote to Sony TV With Code [Direct Code Entry]
[1] Press the Power button to switch on your Sony TV.
Tip: You can also turn on Sony TV without a remote by pressing the physical power button.
[2] Then, press and hold the SETUP button on the remote.

[3] Release the button when the LED indicator light begins to flash.
[4] Press the TV button to continue.
[5] Enter the correct remote code. If the code is correct, the LED indicator light will turn off.
Tip: If you don’t have the user manual, refer to Sony TV remote codes or else check the below table.
[6] Point the remote at the Sony TV and press the Power button.
[7] If the Sony TV is turned off, you have successfully programmed the universal remote.
How to Program Universal Remote to Sony TV Without Code [Code Search]
[1] Turn on your Sony TV by pressing the power button.
[2] Press and hold the SETUP button of the universal remote until the LED light on the remote starts flashing.
[3] Next, press the TV button. If you want to control other devices, press the corresponding Device button.
[4] Now, keep pressing the Power button on the remote every 5 seconds until the Sony TV is turned off.
[5] Then, press the Power button of the TV to turn it on.
[6] Following that, continuously press the Volume+ button every 3 seconds until the TV gets turned off.
[7] Once the Sony TV is turned off, click the TV button and press the Power button on the remote.
[8] If the Sony TV turns on when you press the power button, the remote programming is successful.
Note: Likewise, you can program Blackweb universal remote without a code if the remote fails to pair with remote codes.
Universal Remote Codes for Sony TV
Here is the list of 3, 4, and 5 digit universal remote codes for Sony TV.
3 Digit Remote Codes
111 | 011 | 273 | 000 | 080 |
4 Digit Remote Codes
1177 | 1135 | 1093 | 1036 | 1001 |
5 Digit Remote Codes
11913 | 13121 | 14808 | 14700 | 14200 | 14102 |
13267 | 13153 | 14760 | 12506 | 19016 | 16415 |
19848 | 10565 | 18152 | 10717 | 13251 | 11712 |
12337 | 19557 | 14741 | 15045 | 16744 | 14352 |
11100 | 12736 | 11925 | 11904 | 11791 | 11786 |
11400 | 10080 | 10834 | 10353 | 11317 | 10273 |
10011 | 10000 | 11685 | 11300 | 10810 |
FAQ
You can use codes like 1071, 5811, 5321, 4981, 1901, and 2741 to program a GE universal remote to Sony TV.
Ensure that the TV is turned on. Press and hold the SET button until the LED flashes. Press the TV button and enter the code by referring to the remote codes table. After entering the code, press Enter. Point the remote at the TV and press the Power button. If it turns off the TV, you have successfully programmed the remote.