Bauhn TV Remote Not Working | Reasons and DIY Fixes
Although Bauhn Smart TV is a good TV brand, one of the most frequent problems Bauhn TV users encounter is the remote not working. The main reasons responsible for this issue are discharged batteries and signal interferences. Since these problems may be frequent in all smart TV remotes, you don’t have to buy a new replacement remote or universal remote right away. Instead, you can try these troubleshooting methods to fix the Bauhn TV remote not working issue.
Reasons for Bauhn TV Remote Not Working
The Bauhn TV remote may be unresponsive if it has been affected by these reasons.
| SCENARIO | REASONS |
|---|---|
| 1 | The remote will stop working due to insufficient or weak batteries |
| 2 | When there is an issue with an infrared signal receiver or sensor |
| 3 | Due to a speck of dirt, the keys may stuck inside the remote |
| 4 | If there is a visible sign of physical damage on your remote |
| 5 | Because of signal blockage, the IR signals won’t be sent to the TV |
How to Fix Bauhn TV Remote Not Working
You can try these workarounds individually to fix the Bauhn TV remote not working issue.
Change the Remote Batteries
The batteries are the main reason for the Bauhn TV remote to stop working. If the batteries have insufficient charge, you will be experiencing such a remote issue. Therefore, the only solution is to replace the batteries with newer ones. Eject the old batteries from the battery compartment and replace them with newer ones. Ensure to insert the batteries into the battery compartment based on their polarities and ensure that there is no dust inside the battery compartment.
Note: If you don’t have fresh batteries, you can use universal remote apps to control your Bauhn TV from an Android device.
Test the IR Emitter
If Bauhn TV is not responding to the remote or buttons, ensure that the remote’s IR emitter is not defective. There is an easy way to check whether the Bauhn TV remote is capable of sending IR signals to the TV through a camera test.
- Open the Camera app on your smartphone.
- Aim the top end of the remote towards the smartphone’s rear camera.
- Now press the remote keys randomly and check if you can see the blinking light on the smartphone screen.
- If you can’t see a light, you can confirm that the remote’s LED has an issue. So, you can buy a new replacement remote.
Note: In case the replacement remote is unavailable for Bauhn Non-Smart TV, don’t worry. You can still control your Bauhn TV with the help of the Non-Smart TV universal remote app.
Clear the Obstructions
If you want your Bauhn TV to respond properly to remote commands, ensure to keep a clear path while operating the remote controller. Most of the time, the TV does not work with the remote actions if the obstacles stop the path between the remote and the TV. So, make sure to relocate objects such as furniture, speakers, or soundbars if placed in front of the TV sensor. It is recommended to use the remote in a closer range of fewer than 30 feet.
Clean the Remote
Because of excessive dirt or debris, some remote buttons may get stuck inside. As a consequence, you won’t be able to operate the remote control until the buttons are released. To avoid this problem, it is recommended to clean your Bauhn TV remote at least once a week. You can use 99% isopropyl alcohol solution, microfiber cloth, toothpicks, cotton swabs, or tissue paper, to clean your remote.
Power Cycle the Remote
Power cycling is the best way to fix if the Bauhn TV remote is not working. This method helps to clear the residual power left inside the remote.
[1] Remove the batteries from the remote control.
[2] Press and hold the Power button for at least 20 seconds to drain the residual power.
[3] Next, reinsert the batteries into the remote based on their positive and negative polarities.
[4] Test the remote control whether it works without any issues.
Power Cycle Bauhn TV
Soft resetting the TV is the quick solution to fix any external factors causing the problems in the Bauhn TV. Moreover, this will reset the TV without deleting the data and the installed apps. To perform a soft reset, follow these steps.
[1] Unplug the TV adapter from the power source.
[2] Keep the TV adapter unplugged and rest it for at least 60 seconds.
[3] After a minute, plug the TV adapter back into the power outlet to turn it on. Test the Bauhn TV remote to see whether it is working or not.
Contact Bauhn Support
If the Bauhn TV remote is still not working after trying these methods, you can finally visit the Bauhn TV support webpage. Once you visit the website, click Contact us here to submit a query to the Bauhn support team. If the request has been addressed, they will get back to you with the necessary instructions to fix the issue. If required, you can contact their official toll-free number 1300 00 2534 to speak to a customer support agent.
Use Bauhn TV Remote App
If the remote is found defective, you can use the Bauhn TV remote control app to control your TV easily. In case you are not interested in using the remote app, order a new replacement remote from nearby Bauhn service centers. If you feel that the original remote price is quite high, buy a universal remote which is cheaper than the original remote.
FAQ
You can either use physical buttons or install any third-party remote app to control the Bauhn webOS TV with ease.
If the remote is not working with new batteries, it means that it has a defective IR emitter. If that’s the case, buy a new remote to control your Bauhn TV.
