Vivitar Universal Remote Codes with Programming Instructions
Vivitar universal remote is a cost-friendly option when the Vizio TV remote is not working. This remote can control 4-8 devices depending on your purchased remote model. However, the Vivitar universal remote cannot be operated directly since it requires programming with your device. For this purpose, we have listed the remote codes for all popular brands you can use to program a Vivitar universal remote to a TV, VCR, DVD, set-top box, etc.
List of Remote Codes for Vivitar Universal Remote
You can use the following remote codes to program a Vivitar universal remote.
4 Digit Vivitar Remote Codes
Vivitar Remote Codes for Vizio TV
Vivitar Remote Codes for Sony TV
Vivitar Remote Codes for Philips TV
Note: Similarly, you can use Philips TV remote codes to program a Philips universal remote to its supported device.
Vivitar Remote Codes for Dynex TV
Vivitar Remote Codes for Samsung TV
Vivitar Remote Control Codes for Sanyo TV
Vivitar Remote Control Codes for LG TV
Vivitar Remote Codes for TCL TV
Vivitar Remote Codes for Insignia TV
Vivitar Remote Codes for Element TV
Vivitar Remote Codes For Emerson TV
Note: If the above codes don’t work, you should try using Emerson TV remote codes to finish remote programming.
Vivitar Remote Codes For Panasonic TV
How to Program Vivitar Universal Remote to Smart TV
 Turn on the device and press the TV button on the universal remote.
 Press the SETUP button and hold it until the LED begins to flash. This indicates that the remote is in learning mode.
 Enter the remote code of your Smart TV which you can find in the above table.
 After entering the code, aim the remote toward the TV, press the Power button, and keep hold of it.
 If your TV gets turned off, you can release the Power button.
That’s it. The remote programming has been completed and you can start using the Vivitar universal remote to control your TV.
Replace the old batteries with new ones, clean the remote buttons or fix the jammed buttons and check if the IR sensor is working or not. If the IR emitter is damaged, then you should replace the remote.
By using the code-search method, you can program Vivitar universal remote without a code.