4 & 5-Digit Supersonic TV Remote Codes with Programming Guide

Supersonic generally ship a remote control on every purchase of new LCD, LED, and Smart TVs. But at some point, you may not be able to use the original remote that comes with your TV. As an alternative, you can buy a universal remote and use it to control your device. Meanwhile, you should know the remote codes to program a universal remote to Supersonic TV.

List of Universal Remote Codes for Supersonic TV

The following are the Supersonic TV codes for all brands of universal remotes.

4 Digit Codes

0471	1301	2881	0861	0901	0341
1337	5330	2784	2397	0096	0832
0482	0036	4701	0241	1421	0944
0455	0009	0264	3204	3894	3877
3595	0698	1753	0037	3154	2104
0556	3593	0208

5 Digit Codes

11531	10178	18437	18339	17231
16032	13147	11748	12397	17048
14216	12403	18826	19715	10125
10223	13894	13877	13593	12784
11753	13204	13595	12104	13154

Comcast Remote Codes

11531	10178	13894	13204
13595	12104	13154

Supersonic TV Remote Codes for DirecTV

13894	13877	13593	12784	11753
13204	13595	12104	13154

Dish Remote Codes

3894

3595

1753

2104

3593

GE Universal Remote Codes

5330

4701

0241

1421

0944

One For All Universal Remote Codes

0455	0009	0264	3204	3894
3877	3595	0698	1753	0037
3154	2104	0556	3593	0208

Philips Universal Remote Codes

18437	18339	17231	16032	17048	14216
12403	18826	19715	10125	10223	0096
1421	0832	0241	0482	4101	0036

RCA Remote Codes

3204	1753	3154	2104	3593
13593	11753	13204	12104	13154

Spectrum Remote Codes

0471	1301	2881	0861	0901	0341
1337	2784	2397	3894	3595	1753
3154	2104	3593	13154	13894	12104
13593	13204	13147	12397	11748	13595

U-verse Remote Codes

13204

13595

12104

13154

0944

Supersonic Universal Remote Codes for Samsung TV

3131

2051

0812

Note: You can use Blackweb universal remote codes to program the Blackweb universal remote and control 6 devices at a time.

Remote Programming Guide

You can follow any one of the instructions to program your universal remote to your Supersonic TV.

• Without Codes
• Manual Method
• Code Search

How to Program Universal Remote to Supersonic TV Without Codes

1. Turn on your Supersonic TV using the physical Power button.

2. Press the TV button on the universal remote and hold it for 3 seconds. Release the button if the LED light starts flashing,

3. Next, press the CH+ and CH- buttons continuously until you see on/off signals on the remote.

4. Following that, press the Up and Down buttons at a time until the TV is turned off.

5. Once turned off, press the Power button on the remote to check if it turns on the TV.

6. If it works, press the Channel keys to test its functions.

7. If all remote functions are properly functioning, press the TV button to store the code on the remote.

How to Program Universal Remote to Supersonic TV using Manual Method

1. Make sure that the Supersonic TV is turned on using the physical Power button.

2. Press the TV button on the universal remote.

3. Next, press the SETUP button and hold it until the LED light begins to flash.

4. Enter the remote code by referring to the above table or using the user manual.

5. After entering the code, aim the remote at the TV and press the Power button and keep hold of it.

6. If it turns off the TV, you have successfully programmed the remote.

How to Program Universal Remote to Supersonic TV using Code Search

1. Press the physical Power button to turn on your Supersonic TV.

2. Press the SETUP button and keep hold of it for a few seconds.

3. If the LED light starts blinking, enter the code 9-9-1 in sequence.

4. Press the Channel Up and Power buttons and hold them simultaneously until the device is turned off.

FYI: The code searching process will take more time, based on the TV manufacturer. Your TV will turn off automatically to indicate that the remote programming is successful.